Search

Search

All the premium quality essentials

View premium imported gear from our friends over at cloutac.com

To contact us please email info@umbrellaarmory.com

Unavailable or selection not valid

Project completion time*: 14 days

umbrella build 4 u

The Krytac Upgrade Service is available for customers to receive a complete Umbrella Armory custom build installed in their stock Krytac AEG, by our technicians at our workshop.

We use the same builds we currently use in our prebuilt Krytacs we have mastered upgrading over the years to deliver consistent, reliable, and OP results. Additionally, all our upgrades will include a 1 year extendable warranty with a complementary service appointment.

365 day

warranty

For absolute peace of mind, each of our upgrades will include a full year extendable warranty with a complementary service appointment.

streamline

pipeline

We developed a pipeline specifically for upgrade gun projects to follow so we can deliver streamlined, consistent results. Please follow this upon purchase:

increased accuracy, rate of fire, performance, potential

An enhanced rate of fire can change any player's game. Precise accuracy can make the game unfair. Extended range can render you unreachable. Increased durability will outlast the competition.

The parts our engineers install are constantly updating to equip customers with the best balance between out performance and maintenance in the pursuit of an elevated Airsoft experience. Your build will match the corresponding gun/mission listed on our Trello board minus magazines and batteries. Link: UA Builds and Included

350_FPS

Measured with .2 gram BBs. This is the reference velocity we test this AEG to shoot under but as close as possible to while using our R-Hop 2.0 Barrel assembly. Different extreme environments, and hop up adjustments may affect velocity measurements. Contact customer support if you would like to request an alteration info@umbrellaarmory.com.

42_RPS

Tested at 12.6 Volts on our power supply that simulates a fully charged 11.1 Volt LiPo Battery. This is the reference rate of fire we test this AEG to shoot at minimum at. Rate of fire may be higher depending on slight deviations of part tolerance/batch changes. Rate of fire can be adjusted down via GATE Titan GCS.

195_FT

Measured with .32 gram BBs (suggested weight for optimal velocity and range effectiveness). This is the approximate furthest range the user can consistently engage players at with this AEG based on our experience while using our R-Hop 2.0 Barrel assembly. Different extreme environments, BB weight and hop up adjustments may affect effective range.

27_MS

Tested at 12.6 Volts on our power supply that simulates a fully charged 11.1 Volt LiPo Battery. This is the approximate time this AEG takes to complete a full cycle from trigger pull to piston pick up to release. Note this is not a Trigger response time (trigger pull to piston release) as that can be manipulated through pre-cocking and not an effective measurement of performance throughput.

400_FPS

Measured with .2 gram BBs. This is the reference velocity we test this AEG to shoot under but as close as possible to while using our R-Hop 2.0 Barrel assembly. Different extreme environments, and hop up adjustments may affect velocity measurements. Contact customer support if you would like to request an alteration info@umbrellaarmory.com.

30_RPS

Tested at 12.6 Volts on our power supply that simulates a fully charged 11.1 Volt LiPo Battery. This is the reference rate of fire we test this AEG to shoot at minimum at. Rate of fire may be higher depending on slight deviations of part tolerance/batch changes. Rate of fire can be adjusted down via GATE Titan GCS.

225_FT

Measured with .32 gram BBs (suggested weight for optimal velocity and range effectiveness). This is the approximate furthest range the user can consistently engage players at with this AEG based on our experience while using our R-Hop 2.0 Barrel assembly. Different extreme environments, BB weight and hop up adjustments may affect effective range.

33_MS

Tested at 12.6 Volts on our power supply that simulates a fully charged 11.1 Volt LiPo Battery. This is the approximate time this AEG takes to complete a full cycle from trigger pull to piston pick up to release. Note this is not a Trigger response time (trigger pull to piston release) as that can be manipulated through pre-cocking and not an effective measurement of performance throughput.

450_FPS

Measured with .2 gram BBs. This is the reference velocity we test this AEG to shoot under but as close as possible to while using our R-Hop 2.0 Barrel assembly. Different extreme environments, and hop up adjustments may affect velocity measurements. Contact customer support if you would like to request an alteration info@umbrellaarmory.com.

27_RPS

Tested at 12.6 Volts on our power supply that simulates a fully charged 11.1 Volt LiPo Battery. This is the reference rate of fire we test this AEG to shoot at minimum at. Rate of fire may be higher depending on slight deviations of part tolerance/batch changes. Rate of fire can be adjusted down via GATE Titan GCS.

250_FT

Measured with .36 gram BBs (suggested weight for optimal velocity and range effectiveness). This is the approximate furthest range the user can consistently engage players at with this AEG based on our experience while using our R-Hop 2.0 Barrel assembly. Different extreme environments, BB weight and hop up adjustments may affect effective range.

35_MS

Tested at 12.6 Volts on our power supply that simulates a fully charged 11.1 Volt LiPo Battery. This is the approximate time this AEG takes to complete a full cycle from trigger pull to piston pick up to release. Note this is not a Trigger response time (trigger pull to piston release) as that can be manipulated through pre-cocking and not an effective measurement of performance throughput.

500_FPS

Measured with .2 gram BBs. This is the reference velocity we test this AEG to shoot under but as close as possible to while using our R-Hop 2.0 Barrel assembly. Different extreme environments, and hop up adjustments may affect velocity measurements. Contact customer support if you would like to request an alteration info@umbrellaarmory.com.

25_RPS

Tested at 12.6 Volts on our power supply that simulates a fully charged 11.1 Volt LiPo Battery. This is the reference rate of fire we test this AEG to shoot at minimum at. Rate of fire may be higher depending on slight deviations of part tolerance/batch changes. Rate of fire can be adjusted down or semi-locked via GATE Titan GCS.

275_FT

Measured with .4 gram BBs (suggested weight for optimal velocity and range effectiveness). This is the approximate furthest range the user can consistently engage players at with this AEG based on our experience while using our R-Hop 2.0 Barrel assembly. Different extreme environments, BB weight and hop up adjustments may affect effective range.

37_MS

Tested at 12.6 Volts on our power supply that simulates a fully charged 11.1 Volt LiPo Battery. This is the approximate time this AEG takes to complete a full cycle from trigger pull to piston pick up to release. Note this is not a Trigger response time (trigger pull to piston release) as that can be manipulated through pre-cocking and not an effective measurement of performance throughput.

"My gun is partially upgraded already can I still get it upgraded by you?"

If there are any changes to your gun, internal or external please contact us info@umbrellaarmory.com to confirm upgrade eligibility. We have a specific upgrade pipeline that we follow to deliver precise and consistent results. Should the base gun be altered too much, we would not be able to deliver the results we intend to offer in both performance and overall experience. We do not pick up projects left off by other technicians.

 

"I already have X parts, can I get a discount?"

Generally:

Short answer, no. Primarily, we want to ensure the parts used in our builds are up to our standards as we qc components that arrive to our shop and maintain additional warranties with vendors to deliver comprehensive/extended warranties. Additionally, we do not want to be responsible parts that fail or are not ours. Don't send us anything else except your gun.

For R-Hop/ Barrel assemblies:

We allow two options for customers when they send in their gun in regards to the installed inner barrel assembly. Either they include the stock assembly they received with their Krytac or an R-hop assembly from us. Should we receive anything else;we will not use it to test/QC the build with, instead we will install a stock barrel assembly to reference with and send back with your rifle (unless you selected "Yes" to include a R-Hop barrel assembly in which case that will be installed). Should you choose to run any other inner barrel assembly that is not ours after your rifle is upgraded, we are not responsible for any issues that arise.

"Can you use this instead of that?"

Sorry, but no.

"Is there a break-in period?"

We advise shooting 5000 rounds to properly set in the build. Most issues customers do experience often occur within the 5000 rounds they initially play though. If any issues do arise within the break in period, we will repair free of charge.

"Is there any special maintenance instructions?"

Please clean your barrel with an unjamming rod and a dry piece of microfiber cloth after every 3000 rounds or so. Absolutely NO silicone oil, grease, water, liquids of any kind. Also no need to disassemble your hop up unit or remove the inner barrel from your hop up unit.

If you notice any issues, please email us so we can advise at info@umbrellaarmory.com.

"What weight BB's should I use?"

Most guns will need at least .28g BBs before you start seeing the R-Hop advantage take affect. Please see referenced weight BB suggested for the mission package's effective range you selected.

AEGs that shoot between 350FPS - 410FPS (with .2g BBs) will see the best results with .32g BBs. Using heavier weights will always be the better choice with R-Hop barrel assemblies. With our complete sets you can be able to run as low as .2g BBs with your gun but you may need to use barely any hop up engagement (turned down).

We advise using high quality Bio-friendly BBs to be environmentally conscious. Experiment with different weight BBs to find a weight that is perfect for your set up.

"What if I send in something different than the model listed?"

Please don't. If you do, we will send back your rifle as it arrived and cancel/refund your order with a restocking fee of up to 30% per our return policy. If your rifle is not stock in any way (with the exception of using one of our R-Hop Barrel assemblies), or missing parts please reach out to us to confirm eligibility before purchasing this upgrade.


*Current estimated lead time. Custom upgrade. May take up to 8 weeks to fulfill.

**We advise selecting "Yes" if you do not already have one of our R-Hop Barrel Assemblies installed. If you select "No" you will not receive a R-Hop 2.0 Barrel assembly, and if you do not have one of our R-Hop inner barrel assemblies; your build will be tested/completed with a Stock Barrel assembly which may result in lower FPS and WILL result in lower effective range.

Upon check out, any items purchased in your cart along with this upgrade will be partially fulfilled separately. Do not add items to the cart you want us to install/replace your build with.

mission critical goods


Sold out

Sold out

Sold out

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods