Current lead time*:2 days
Current lead time*:2 days
The CMF16 from G&G is a cult favorite here with our UA team. Being built with G&G's latest unbeatable polymer; the reciever and handguard make the rifle both incredibly light weight and durable. The insides of the rifle have been completely overhauled to feature a CQB punishing but rugged DSG build. Topped off with our R-Hop 2.0 complete inner barrel assembly for outranging precision.
The rate of fire can be adjusted or semi-locked to meet field requirements; however, with the DSG set, this AEG achieves an extremely fast trigger response for crisp and responsive follow up shots. With our specific G&G ETU Trigger SHUE installed, this trigger features a reduced pull and reset making shots spammable (especially when programmed to Binary shot mode). The installed Perun ETU++ is pre-tuned by our technicians for optimal performance. Though users can change preferences via selector switch/trigger pull sequences outlined in the included manual.
For absolute peace of mind, this rifle is sold with a full year of warranty coverage from the date it leaves our facility.
An included complementary service appointment to clean, and tune up this AEG for prolonged care and after purchase support.
Measured with .2 gram BBs. This is the reference velocity we test this AEG to shoot under but as close as possible to. Different extreme environments, and hop up adjustments may affect velocity measurements. Contact customer support if you would like to request an alteration info@umbrellaarmory.com.
Tested at 12.6 Volts on our power supply that simulates a fully charged 11.1 Volt LiPo Battery. This is the reference rate of fire we test this AEG to shoot at minimum at. Rate of fire may be higher depending on slight deviations of part tolerance/batch changes. Rate of fire can be adjusted down via ETU trigger pull sequence.
Measured with .32 gram BBs (suggested weight for optimal velocity and range effectiveness). This is the approximate furthest range the user can consistently engage players at with this AEG based on our experience. Different extreme environments, BB weight and hop up adjustments may affect effective range.
Tested at 12.6 Volts on our power supply that simulates a fully charged 11.1 Volt LiPo Battery. This is the approximate time this AEG takes to complete a full cycle from trigger pull to piston pick up to release. Note this is not a Trigger response time (trigger pull to piston release) as that can be manipulated through pre-cocking and not an effective measurement of performance throughput.
An enhanced rate of fire can change any player's game. Precise accuracy can make the game unfair. Extended range can render you unreachable. Increased durability will outlast the competition.
The parts our engineers install are constantly updating to equip customers with the best balance between out performance and maintenance in the pursuit of an elevated Airsoft experience.
View our Trello Board to see the latest build we are using with this rifle and everything included with it.
Total weight of rifle without battery and magazine installed.
Length of upgraded/installed R-Hopped tight bore inner barrel.
Use -14mm (counter clock wise) compatible muzzle devices with this rifle.
Length of rifle with stock collapsed and extended.
Battery: Can fit 11.1v 2000mah 20c Li-po (Deans/T-Plug)
Magazine: (Standard M4 AEG type compatible.) PTS EPM; Krytac Mid-Cap; KWA MS120; Lonex Flash Mag
Ammo: Suggested weight is .32g for general optimal range and velocity. Lighter weight will require user to turn down hop up; heavier weight will have extended travel time but increased range/accuracy.
*Current estimated lead time. Custom built to order item. May take up to 8 weeks to fulfill.
*All Airsoft guns will be shipped with a blaze orange tip that is Federally required.
*Magazine pictured may not be included. Please check "Features" section to view included items.
*Must be 18 years of age or older to purchase.
| VELOCITY w/ .2 | RATE OF FIRE w/ 12.6 | CYCLE TIME w/o PRECOCKING | RANGE w/ .3 |
| 350fps | 40rps | 30ms | to 225ft |
| DRIVETRAIN | ECU | INNERBARREL ASSEMBLY | TRIGGER |
| 18:1 _DSG | PERUN | R-HOP_2.0 | REDUCE TRAVEL MODIFIED |
| WARRANTY | BATTERY | UA PATCHES | LEADTIME |
| 12 MONTH EXTENDABLE | 11.1V LIPO SUGGESTED (INCLUDED) | INCLUDED | 4 WEEKS |
| LENGTH EXTENDED | LENGTH COLLAPSED | WEIGHT WITH BATTERY AND MAGAZINE | FUN |
| 30.7in | 26.3IN | 5.3lbs | ☺ |
For full up to date build list and included items, please visit our Trello board: https://trello.com/b/ZnKCQJMo/ua-builds-and-included
This rifle is built to order with up to an estimated 4 week lead time. Email info@umbrellaarmory.comfor order updates or inquiries.
Subscribe to our newsletter for the latest drops, sales, and other exclusive info (we only send about 4 quality emails a month)
