We've played with the idea of making our own ARDs for awhile now. Though a lot of affordable options are on the market already. They seem to be heavily lacking. Many others using similar 3d printing tech have far too thick grids causing distracting results when looking through it with your LPVO at 1x or any red dot sight. They also limit the light gathering abilities of the glass and optic, causing the higher end magnification becoming too dark to use in low-light and twilight hours. As well as making the sight picture far too busy and blurs the image.
Our Ultra Fine - Anti Reflection Devices is easily less than half the thickness of our competitors using MJF and FDM.
Features:
- Exceptional Visual Clarity
- Maximized Light Transmittance
- Complete reflection block at ~25 degree angle
- Rugged matte texture surface finish, but go ahead rattle can it!
- Adds an extra layer of defense to your optics' glass
- Exceptional weather, chemical and high heat tolerance of 105c or 221f!
Compatibility: You can measure your OD of your optic, the ones we test are within these parameters. Having an OD thicker than mentioned by 0.05mm, may result in a very tight fit.
Size |
Fits... |
28.00mm Red Dot |
HS403B/C Series / Supposedly a lot of other similar in design. |
28.85mm Red Dot |
HS503B/C Series |
29.70mm Red Dot |
HS403R |
CUSTOM:
We only need 2 dimensions measured from a caliper on your optic. OD / Outer Diameter of the lens housing. In XX.XX mm format. Yes 2 spots after the decimal in milimeters. We also need to measure its distance from the first obstacle it might contact from the front edge to that obstacle. If its more than 10mm, you can just tell us its >10mm. I.e. some red dots are 6.5mm or 9mm etc, so we don't want to make the ARD protrude too far than what we already have designed.
You can place these dimensions in the "Add instructions for seller" when you go to your CART (This option only shows up after you added something to your cart).. Also tell us the brand and model of the optic for reference.
If there are other special features such as notches let us know their precise dimensions. Chances are there may be more than 1 sample test to send over. However cost will be the same. You can also email us at info@umbrellaarmory.com for more detailed information outside this.
This is only for tubular designs.
IF YOU DONT LIKE IT JUST SHIP IT BACK, AND WE WILL REFUND YOU AUTOMATICALLY.