UA7832
Air nozzle | G2 type air nozzle with dual o-ring |
Anti-reversal latch | G&G anti-reversal latch, spring |
Barrel | 245 millimeter LAPPED Prometheus 6.03 EG inner barrel with R-Hop patch |
Bearing | Umbrella Armory 8 millimeter steel caged bearing set |
Bucking | Madbull blue soft 60 degree bucking, flat hop modified |
Cylinder | G&G ported cylinder |
Cylinder head | G2 double o-ring cylinder head |
Electrical | Perun ETU++ (rear-wired), G&G ETU trigger board (with magazine cut-off feature) |
Gears | 13:1 SHS SSG set |
Gearbox shell | G2 V2 gearbox shell |
Hop-up | UA x Maxx Model, Pro, hop-up chamber |
Motor | 25000 revolutions per minute, G&G Ifrit motor |
Piston | G2 piston |
Piston head | Lonex polyoxymethylene piston head |
Spring | ASG M125 spring |
Tappet plate | G2 tappet plate |
Tappet spring | G&G tappet spring |
Trigger | G&G ETU red flattrigger |
Battery | Matrix 11.1 volt 2000 mah 20c lithium polymer battery, butterfly type |
Magazine | G&G 40 round M4 type mid-cap magazine |
Sights | Flip up sights |
Misc | Perun programming card manual, unjamming rod, patch |
Sold Out $1,099.00 USD
400_FPS (.2g) | 28_RPS (12.6v) | 33_MS (12.6v) | 215_FT (.32g) |
PRODUCT DETAILS
MATERIAL
DISCLAIMER
We prefer these weights for these muzzle velocities. For two main reasons. Best performance, and reliability. These BB weights will give the optimal range, and feed reliably. Going heavier than what is recommended may cause issues or PME if the magazine is not modified.
450-500FPS = 0.36g-0.40g
400-450FPS = 0.28g-0.36g
330-350FPS = 0.23g-0.25g
By clicking “Accept All Cookies”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Subscribe to our newsletter for the latest drops, sales, and other exclusive info (we only send about 4 quality emails a month)