UA6100
Air nozzle | VFC M4 type air nozzle with o-ring |
Anti-reversal latch | G&G anti-reversal latch, spring |
Barrel | Lapped 135 millimeter Prometheus 6.03 EG inner barrel with R-Hop patch |
Bearing | Umbrella Armory 8 millimeter steel caged bearing set |
Bucking | G&G green, flat hop modified |
Cylinder | G&G ported cylinder |
Cylinder head | CNC double o-ring cylinder head |
Electrical | Perun ETU++ (rear-wired), G&G ETU trigger board |
Gears | 18:1 SHS; DSG, 10 tooth bevel |
Gearbox shell | G&G reinforced ETU V2 gearbox shell |
Hop-up | G&G rotary style unit with UA flat arm |
Motor | 25000 revolutions per minute, G&G Ifrit motor |
Piston | G2 piston |
Piston head | Lonex polyoxymethylene piston head |
Spring | Guarder oil tempered wire spring SP160 with SHS bearing spring guide |
Tappet plate | G&G tappet plate |
Tappet spring | G&G tappet spring |
Trigger | G&G ETU skeleton trigger |
Battery | Matrix 11.1 volt 1450 mah 20c lithium polymer battery, stick type |
Magazine | G&G ARP9 300 round hi-capacity magazine |
Sights | Flip up sights |
Misc | Perun programming card manual, UA_Banshee amplifier, Airtech studios battery extension unit, unjamming rod, patch |
Sold Out $999.99 USD
350_FPS (.2g) | 42_RPS (12.6v) | 27_MS (12.6v) | 185_FT (.32g) |
PRODUCT DETAILS
MATERIAL
DISCLAIMER
We prefer these weights for these muzzle velocities. For two main reasons. Best performance, and reliability. These BB weights will give the optimal range, and feed reliably. Going heavier than what is recommended may cause issues or PME if the magazine is not modified.
450-500FPS = 0.36g-0.40g
400-450FPS = 0.28g-0.36g
330-350FPS = 0.23g-0.25g
By clicking “Accept All Cookies”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Subscribe to our newsletter for the latest drops, sales, and other exclusive info (we only send about 4 quality emails a month)