UA1389
INTERNALS
| Air nozzle | Krytac Nozzle |
| Anti-reversal latch | Krytac Anti-reversal latch, spring |
| Barrel | Lapped 155 millimeter Prometheus 6.03 EG inner barrel with R-Hop patch |
| Bearing | Umbrella Armory 8 millimeter steel caged bearing set |
| Bucking | Madbull Red Shark Fin bucking, flat hop modified |
| Cylinder | Krytac brass cylinder |
| Cylinder head | CNC double o-ring cylinder head |
| Electrical | GATE Titan advanced V2 (rear-wired), pre-programmed |
| Gears | 18:1 ratio, Rocket DSG, Krytac spur gear, Rocket 10 tooth bevel gear |
| Gearbox shell | Krytac Nautilus V2 gearbox shell |
| Hop-up | UA x Maxx Model, Pro, hop-up chamber |
| Motor | Warhead Industries 35k base brushless motor |
| Piston | Rocket polycarbonate,15 tooth steel rack, short stroked |
| Piston head | Lonex polyoxymethylene piston head, washer AOE |
| Spring | SP160 spring |
| Tappet plate | Modified Guarder tappet plate |
| Tappet spring | Krytac tappet spring |
| Trigger | Maxx Model adjustable trigger, red type b, pre-tuned |
| Battery | Matrix 11.1 volt 1300 mah 45c lithium polymer battery, small brick type |
| Magazine | Krytac 150 round M4 type mid-cap magazine |
| Sights | KRISS flip up sights |
| Misc | GATE USB link, rail adapter, unjamming rod, patch |
Sold Out
Upgraded Krytac PDW-M AEG, equipped with individually tested parts and modifications suited for high performance competitive use.
Recent updates:
| 330-350_FPS (.2g) | 50_RPS (12.6v) | 27_MS (12.6v) | 185_FT (.32g) |
PRODUCT DETAILS
MATERIAL
DISCLAIMER
We prefer these weights for these muzzle velocities. For two main reasons. Best performance, and reliability. These BB weights will give the optimal range, and feed reliably. Going heavier than what is recommended may cause issues or PME if the magazine is not modified.
450-500FPS = 0.36g-0.40g
400-450FPS = 0.28g-0.36g
330-350FPS = 0.23g-0.25g
Subscribe to our newsletter for the latest drops, sales, and other exclusive info (we only send about 4 quality emails a month)