ARD Killflash HexCover for LPVO & Scopes

Building on top of our Ultra thin press fit ARDs. We developed an model to incorporate a shock bungie cord with a cap!

With the unbelievable clarity our existing ARDs offered, we wanted to offer a way to protect your own lens from dust and general transport. The cap features some quality of life improvements, including notches to center the cap, provide a lower profile for piggyback optics and effectively act as an added sunshade/rainhood if flipped upwards. As well as strong elastic tension so that your cap stays in whatever position you flip it to.

Features:

• Exceptional Visual Clarity
• Maximized Light Transmittance
• SGT Knot's Marine Grade Shock Cord Bungee pre-installed
• Low profile cap / Sunshade
• Complete reflection block at ~25 degree angle / Crystal Clear View at ~45 degrees
• Rugged matte texture surface finish, but go ahead rattle can it!
• Adds an extra layer of defense to your optics' glass
• Exceptional weather, chemical and high heat tolerance of 105c or 221f!
  
  

Custom Sizes:
Select Sizing constraint/price.
In order notes (At the Cart Screen) Please add the following.
1) Optic Brand
2) Optic Model
3) Optic Outer Diameter Size in mm with 2 decimal precision (i.e. 32.50mm, or 56.55mm)

Please note that, our HexCovers Pressfit onto the front hood by 10mm, there shouldn't be any obstructions to prevent the HexCover from press fitting all the way in from the outside of the scope. I.e. Red Dot top mounts. There also needs to be at least 6mm clearance from the bottom of the scope's front and the rail itself for the cover extension