Stemming from seeing flaws with some motor towers out in the market.
We decided to bring these, relatively underappreciated product into the market.
Having destroyed dozens of motor towers, from destroyed bearings thats much too small to deal with properly supporting the motor shaft. Or sized dimensionally incorrect causing wobble issues and simply more noisy meshing of the pinion to the bevel. Its quite hard to shim something, if your motor pinion is allowed to pivot and move...
These motor towers feature double bearings, one on both ends. Allowing strong support of the motor shaft, and thus significantly less wobble during load. These bearings are much stronger due to their larger size and much more forgiving when something goes wrong.
Features
Aluminum Construction
Double Bearings sized, 1/8" x 5/16" x 9/64" Shielded
Larger center diameter at 9.5mm vs 9.00mm
Compatible with any Long Type Motor (DC or Brushless)
Warhead motor used as reference, and isn't included!*
The bearings are not interference fit and have to be glued to stay in the tower. Seriously?
Hi Donatas,
The bearings don't need to be glued in at all. Its meerely there to support the shaft. When a pinion is installed, theres no where the bearings can go or fall out on their own.
M
Mark Oliver
Lmg
Worked amazing. Too good. Ended up stopping my bevel gear. But when I went to replace it I figured out the bearings on this product fell apart and moved out of place. Other than that small detail flaw worked amazingly. Reduced friction and in turn increased my battery life
C
Christian
Worked
A
Aidan
Fits perfectly on the warhead motor. I’ve installed 2 so far and it fits almost perfectly into a retro arms gearbox so much easier to shim. Thanks umbrella
